Headlight Beam Adjustment
The headlight beam can be adjusted slightly upward or downward and to the left or right.
-
Position the vehicle on a level surface. The headlight should be approximately 25 ft. (7.6 m) from a wall.
-
Place the transmission in PARK.
-
Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.
-
Apply the brakes. Start the engine. Turn the headlights to high beam.
-
Include the weight of a rider on the seat while performing this step. Observe the headlight aim. As a starting point, the most intense part of the headlight beam should be 8 inches (20 cm) below the mark on the wall. Adjust to operator preference.
-
Tighten or loosen the three (3) headlight screws 1 on the rear of the headlight to adjust the beam upward or downward or to the left or right.
