Intake Pre-Filters
The engine intake pre-filter 1 is located on the right
side of the vehicle. The clutch air intake 2 is located on
the left side of the vehicle.
Inspect the engine pre-filter before each use of the vehicle to ensure adequate air flow. If necessary, remove the pre-filter and clean with soapy water. Dry with low pressure compressed air.
Periodically inspect the clutch (PVT) air intake for debris and clean as needed to ensure adequate air flow.
TIP
When washing the vehicle, always avoid spraying water
directly toward the PVT intake duct. See the Washing the Vehicle section
for recommended washing procedures.