Drive Belt Wear/Burn
| Possible Cause | Solution |
|---|---|
|
Driving at low RPM or ground speed |
Drive at a higher speed. |
|
Insufficient warm-up at low ambient tempera- tures |
Warm the engine at least 5 minutes. With the transmission in neutral, apply small amount of throttle in short bursts, 5 to 7 times. The belt will become more flexible and prevent belt burning. |
|
Slow/easy clutch engage- ment |
Use the throttle quickly and effectively. |
|
Belt slippage from water or snow ingestion into the CVT system |
Dry out the PVT Prevent water from entering the PVT inlet and outlet ducts. Inspect clutch seals for damage if repeated leaking occurs. |
|
Clutch malfunction |
Your POLARIS dealer can assist. |
|
Poor engine performance |
Check for fouled plug or foreign material in gas tank or fuel lines. Your POLARIS dealer can assist. |
|
Wrong or missing belt |
Install the recommended belt. |
|
Improper break-in |
Always break in a new belt and/or clutch. |