Headlight Beam Adjustment
To adjust the headlight beam, do the following:
-
Ensure the tire pressure of all tires is at recommended levels.
-
Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a dark wall.
-
Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.
-
Apply the brakes. Start the engine. Turn on the low-beam headlights.
-
Observe the headlight aim. The most intense part of the headlight beam should be aimed 8" (20 cm) below the mark placed on the wall. Include the weight of a rider on the seat while performing this step.
-
If a headlight needs adjustment, locate the three adjustment screws at the back of each headlight (one on top, two on the bottom).
-
Rotate the adjustment screw to adjust the headlight as needed.