Spark Arrester
- 
                     
                     Never operate the vehicle without the spark arrester. 
- 
                     
                     Remove any combustible materials from the area. 
Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death.
- 
                     
                     Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas that can cause loss of consciousness or death in a very short time. 
- 
                     
                     Do NOT perform service on the spark arrester while the system is HOT. Exhaust system temperatures can reach extreme temperatures. Allow components to cool sufficiently before proceeding. 
- 
                     
                     Do not stand behind or in front of the vehicle while purging the exhaust system. 
- 
                     
                     Never go under the vehicle while it is inclined. 
- 
                     
                     Wear eye protection and gloves while servicing. 
Use the following procedure to periodically purge accumulated carbon from the exhaust pipe.
- 
               
               Turn off engine and allow exhaust to cool sufficiently. 
- 
               
               Remove the spark arrester from the tailpipe of the muffler. 
- 
               
               Remove any debris from spark arrester and the tailpipe. 
- 
               
               Inspect spark arrester for holes in mesh screen. Replace as needed. 
- 
               
               Replace spark arrester and torque bolt to specification. TORQUE8 ft-lbs (11 Nm)