en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Seat Belts

This RZR is equipped with three-point lap and diagonal seat belts for the operator and passenger. Never ride before ensuring seat belts are secured for both the operator and passenger. The driver’s seat belt is equipped with seat belt interlock, automatically limiting vehicle speed when the driver’s seat belt is not secured.

To wear the seat belt properly, do the following:

  1. Pull the seat belt latch downward and across your chest toward the buckle on the inside edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Check to ensure the belt is not twisted before securing.

  2. Push the latch plate into the buckle until it clicks.

  3. Release the strap, it will self-tighten.

  4. Press the red release latch on the buckle to release the seat belt.

Adjusting the Seat Belt

The position of the shoulder strap can be adjusted to the height of the operator.

To adjust the seat belt height, do the following:

  1. Remove the nut 2 from the seat belt bracket.

  2. Move mounting bolt 1 to a higher or lower position.

  3. Reinstall the nut and torque to specification.

TORQUE

Seat Belt Adjustment Bolt

30 ft-lbs (41 N·m)

In this section:

  1. Seat Belt Inspection