en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Polaris Maintenance Schedule

The intervals shown are based on vehicles operated under normal conditions.

Each interval is given in hours and miles (kilometers). Items should be serviced at whichever interval comes first.

Continue to reference the following maintenance schedules at the given intervals as hours and miles (kilometers) increase on the vehicle.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

Initial Break-In Service
First 12 Hours / 100 mi (160 km)
Brake Pads, Brake Lines / Hoses Inspect.
Drive Chain Adjust and lubricate.
Engine Oil and Filter Change the engine oil and filter.
Valve Lash* Adjust.
The break-in period consists of the first 12 hours of operation. Careful treatment of a new engine and drive components will result in more efficient performance and longer life for these components. The items outlined in this service interval only need to be performed at the first 12 hours of operation. They do not need to be performed every 12 hours.
* Have an authorized Polaris dealer or other qualified person perform these services.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

Every 50 Hours / 500 mi (800 km)
Battery Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary.
Brake System Inspect for fluid leaks; add recommended brake fluid from a sealed container if needed.
Drive Chain Inspect; adjust; lubricate.
Engine Oil and Filter Change the engine oil and filter.
Front / Rear Suspension* Inspect for loose or worn components; replace as needed. Lubricate. Inspect shock absorbers for leaks or damage.
Fuel System / Filter* Inspect; cycle key to pressurize fuel pump; check for leaks at fuel system connections, check for leaks at fill cap.
General Lubrication Locate all applicable grease fittings (zerks) and grease.
Shift Cable / Linkage Inspect; adjust; lubricate.
Steering Components Inspect; replace as needed.
Throttle Body Intake Ducts / Flanges Inspect for proper sealing and air leaks.
Wheels / Tires / Lug Nuts Inspect; replace as needed.
Valve Lash* Inspect; adjust as needed.
* Have an authorized Polaris dealer or other qualified person perform these services.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

Every 100 Hours / 1000 mi (1600 km) or Yearly
Air Filter Replace air filter. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean as necessary.
Battery Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary.
Brake Pads, Brake Lines / Hoses Inspect; replace as needed.
Brake System Inspect for fluid leaks; add recommended brake fluid from a sealed container if needed.
Clutches (Drive and Driven)* Inspect; clean; replace as needed.
Drive Belt Inspect; replace as needed.
Drive Chain Inspect; adjust; lubricate.
Engine Mounts Inspect.
Engine Oil and Filter Change the engine oil and filter.
Exhaust Silencer / Pipe Inspect for leaks or damage.
Front / Rear Suspension* Inspect for loose or worn components; replace as needed. Lubricate. Inspect shock absorbers for leaks or damage.
Fuel System / Filter* Inspect; cycle key to pressurize fuel pump; check for leaks at fuel system connections, check for leaks at fill cap.
General Lubrication Locate all applicable grease fittings (zerks) and grease.
Shift Cable / Linkage Inspect; adjust; lubricate.
Spark Arrestor Inspect; clean.
Spark Plugs Inspect; replace as needed.
Steering Components Inspect; replace as needed.
Throttle Body Intake Ducts / Flanges Inspect for proper sealing and air leaks.
Transmission Fluid Change fluid.
Valve Lash* Inspect; adjust as needed.
Wheel Bearings Inspect; replace as needed.
Wheels / Tires / Lug Nuts Inspect; replace as needed.
Wiring Inspect for wear, routing, and retention.
* Have an authorized Polaris dealer or other qualified person perform these services.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.

Additional Maintenance Intervals

Every 200 hours / 2000 mi (3200 km)

or

Every 24 months / 2 years

Brake Fluid Change fluid.

Every 200 hours / 2000 mi (3200 km)

Shock Absorbers* Replace as needed.