Headlight Lamp Replacement

When servicing a halogen lamp, avoid touching the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. If fingers do touch a lamp, clean it with denatured alcohol.

CAUTION
Hot components can cause burns to skin. Allow lamps to cool before servicing.

  1. Remove the four (4) headlight pod screws. Pull the pod cover forward.

  2. Unplug the headlamp from the wiring harness. Be sure to pull on the connector, not on the wiring.

  3. Turn the lamp counter-clockwise to remove it.

  4. Install the new lamp. Make sure the tab on the lamp locates properly in the housing.

  5. Reassemble the pod.

Parent topic: Lights