New Operator Driving Procedures

  1. Complete a certified safety training course. See the Safety Training section.

  2. Wear protective riding gear. See the Safe Riding Gear section.

  3. Perform the pre-ride inspection.

  1. Place the transmission in PARK.

  2. Lock the brake holding latch.

  3. Mount the vehicle from the left side.

  4. Sit upright with both feet on the footrests and both hands on the handlebars.

  5. Start the engine and allow it to warm up.

  1. Shift the transmission into gear.

  2. Check your surroundings and determine your path of travel.

  3. Release the brake holding latch.

  4. Slowly depress the throttle with your right thumb and begin driving.

  5. Drive slowly. Practice maneuvering and using the throttle and brakes on level surfaces.

Parent topic: Driving Procedures