en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Drive Chain Tension

For long chain life and reliability, it is extremely important that you keep the drive chain adjusted properly. Always check drive chain tension before riding.

IMPORTANT
TIMBERSLED SUSPENSION STRUT (TSS) MODELS: The TSS MUST be at full extension and set to at least 200 PSI to measure and adjust drive chain tension properly. To ensure the TSS is at full extension, remove all weight from the shock by tipping the bike on its side or by using an appropriate stand to lift the bike under its engine ensuring the track is suspended off the ground. Inspecting and adjusting a chain without the suspension at full extension will indicate a loose chain and lead to over-tensioning and excessive chain stretch and wear.
NOTE
The drive chain may loosen on the first ride due to initial chain stretch and slider break-in. Re-tighten drive chain after first few rides. If problem persists, your dealer can assist.

In this section:

  1. Measuring Drive Chain Tension
  2. Adjusting Drive Chain Tension
Parent topic: Drive System