PREMIUM and PRO Models
Timbersled ARO Premium and Pro snow bikes are equipped with FOX® QS3® shocks that utilize spring preload adjusters and shock clickers to customize weight transfer and shock compression.
DO NOT EXCEED the MIN / MAX preload values (defined by the tables in this section). Never adjust spring preload shorter than the minimum allowable length. Adjusting shorter than this length could result in damage to the suspension. Failure to comply may result in injury or damage to equipment.
ADJUSTING THE SUSPENSION
For those that wish to customize the ride quality of their snow bike, complete the following procedure:
-
Ride your snow bike. Test ride your snow bike on preferred terrain to feel out the factory suspension settings prior to making any adjustments. Optimal suspension settings can change depending on terrain and skill level.
-
Tune vehicle balance using rear shock preload adjuster 1. See Spring Preload Adjustment (All Models) for preload instruction.
-
Adjust shock compression using shock clickers 2. Tune the firmness of your ride by adjusting the shock clickers on the FOX® QS3® shocks. These clickers have a three-position adjuster for soft, medium, and firm compression settings.
Clicker Position Compression Setting 1 Soft 2 Medium 3 Firm
FRONT SHOCK SPRING SETTINGS
| Model | Front Shock | Spring Rate | Factory Installed Length | Minimum Allowable Length |
|---|---|---|---|---|
|
ARO 3 PREMIUM |
FOX® QS3® | 175 | 7.56 in | 6.9 in |
|
ARO 3 S PREMIUM |
FOX® QS3® | 250 | 7.00 in | 6.0 in |
|
ARO 3 PRO |
FOX® QS3® IBP | 175 | 7.56 in | 6.6 in |
|
ARO 3 S PRO |
FOX® QS3® IBP | 250 | 7.00 in | 6.0 in |
REAR SHOCK SPRING SETTINGS
| Model | Rear Shock | Spring Rate | Factory Installed Length | Minimum Allowable Length |
|---|---|---|---|---|
|
ARO 3 PREMIUM |
FOX® QS3® | 175 | 7.56 in | 7.0 in |
|
ARO 3 S PREMIUM |
FOX® QS3® | 250 | 7.00 in | 6.1 in |
|
ARO 3 PRO |
FOX® QS3® IBP | 175 | 7.56 in | 6.7 in |
|
ARO 3 S PRO |
FOX® QS3® IBP | 250 | 7.00 in | 6.1 in |