Brake Holding Latch
WARNING
Operating the ATV while the brake holding latch
is engaged could result in an accident or fire. Always check to be
sure the latch is disengaged before operating.
To engage the brake holding latch, do the following:
-
Place the transmission in PARK.
-
Squeeze and release the brake lever 1 two or three times, then squeeze and hold.
-
Push the latch 2 forward to engage the lock.
-
Release the brake lever.
-
To release the brake holding latch, squeeze and release the brake lever. It will return to its unlocked position.
WARNING
The brake holding latch may relax if left on
for a long period of time. Always block the wheels to prevent rolling.
Always block the wheels on the downhill side of the ATV if leaving
it parked on a hill. Another option is to park the ATV in a sidehill
position. Never depend on the brake holding latch alone if the ATV
is parked on a hill.