en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Fluid Change

The drain plug 1 is located on the bottom of the gearcase. Access the drain plug through the drain hole in the skid plate.

  1. Position the vehicle on a level surface.

  2. Remove the fill plug with a 8 mm Allen wrench.

  3. Place a drain pan under the drain plug.

  4. Remove the drain plug with a 8 mm Allen wrench.

  5. Clean the drain plug.

  1. Reinstall the drain plug. Torque to specification.

    TORQUE

    Drain Plug Torque:

    10–14 ft-lbs (14–19 Nm)

  2. Add the recommended fluid (listed in the Gearcase Specification Chart) through the fill plug hole until the fluid is even with the bottom of the fill plug hole.

  3. Reinstall the fill plug. Torque to specification.

    TORQUE

    Fill Plug Torque:

    10–14 ft-lbs (14–19 Nm)

  4. Clean any fluid residue from around the drain and fill plugs.

  5. Dispose used fluid properly.

Parent topic: Transmission (Main Gearcase)