en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Seat Installation

  1. To install new seat 1 on motorcycle, insert hat bushing A into slot under rear of seat and slide seat forward, ensuring that tabs B engage slots on new seat. Do not allow seat mount brackets to contact rear fender.

  2. Pull straight up on front of seat to ensure a secure fitting.

  3. Move seat 1 until tabs align with hole in frame as shown and reinstall retained screws. Torque screws to specification.

    TORQUE

    Seat Mount Bracket Screws:

    18 ft-lbs (24 N·m)

WARNING
Seat must be properly installed for safe operation of motorcycle. Failure to ensure proper installation may lead to loss of control and result in serious injury or death.