en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Quick Drive Belt Adjustment

NOTICE

Belt debris during break in of a new belt is normal, clean with a dry cloth, or soft bristle brush.

Check belt tension: Measure belt tension by applying 10 lbs of force on the long span of the belt (RH side). Measure the defection of the belt.

Scale: Reference decal inside the Quick Drive belt cover.

Specification: 1/4 to 1/2 inches (6.35mm to 12.7mm).

Belt installation: See owner’s manual for full install instructions and detail on inspection and service intervals.

  • Used Belt Install: 0.25–0.30” (6.4–7.6mm)

  • New Belt Install: 0.18–0.20” (4.6–5.1mm)

  • Sprocket bolt torque: 45 ft-lbs ((60) NM)

  • Idler bolt torque: 45 ft-lbs ((60) NM)

Parent topic: Safety Labels and Locations