Engine Stops or Loses Power
| Possible Cause | Solution | 
|---|---|
| Out of fuel | Refuel | 
| Kinked or plugged fuel tank vent line or filter | Inspect and replace | 
| Water is present in fuel | Replace with new fuel | 
| Fouled or defective spark plugs | Inspect, clean and/or replace spark plug | 
| Worn or defective spark plug wires | Your POLARIS dealer can assist. | 
| Incorrect spark plug gap or heat range | Set gap to specs or replace plug | 
| Loose ignition connections | Check all connections and tighten | 
| Low battery voltage | Recharge the battery to 12.8 VDC | 
| Incorrect fuel | Replace with fresh recommended fuel | 
| Clogged air filter | Inspect and replace | 
| Clogged intake pre-filter | Inspect and clean (with soapy water) or replace | 
| Other mechanical failure | Your POLARIS dealer can assist. | 
| Overheated engine | Clean radiator screen and core, clean engine exterior, check coolant level. Your POLARIS dealer can assist. | 
| Loose, missing, torn or kinked boost reference line from manifold to fuel pressure regulator or blow-off valve | Replace boost reference line | 
| Loose, missing, torn or kinked boost reference line from turbo compressor to boost control valve | Replace boost reference line | 
| Loose intake system connections | Inspect connections, tighten or replace as needed | 
| Worn or defective wastegate actuation system | Your POLARIS dealer can assist. | 
| Overheated intake air system | Inspect intercooler water lines for leaks or kinks, repair or replace as needed |