Oil Check
Always check the oil when the engine is cold and on a level surface. If the engine is hot when the oil is checked, the level will appear to be overfull.
Access the oil check dipstick 1 through the right rear wheel well. Access the oil fill cap 2 by removing the cargo box. See the Service Access Panels section for details.
-
Position the vehicle on a level surface.
-
Place the transmission in PARK.
-
Start the engine. Allow the engine to idle for 30 seconds.
-
Stop the engine. Wait two (2) minutes to allow oil to drain back to the sump.
-
Remove the dipstick. Wipe it dry with a clean cloth.
-
Reinstall the dipstick completely. Remove the dipstick and check the oil level.
-
Remove the oil fill cap to add the recommended oil as needed. Maintain the oil level between the minimum and maximum marks on the dipstick. Do not overfill.
-
Reinstall the fill cap. Reinstall the dipstick.