Limiter Strap Adjustment

One method of changing ski-to-snow pressure is to adjust the length of the front limiter straps.

• Lengthening the straps decreases ski pressure under acceleration.

• Shortening the straps increases ski pressure under acceleration.

The stock setting for the front torque arm limiter straps is position #3.

Polaris recommends leaving the limiter strap length at position #1 to maintain the optimum ride characteristics of the snowmobile.

Two features can be used to adjust the length of the limiter straps.

• Install hardware in position #1, 2 or 3.

• Turn the cross shaft. This feature is especially helpful when, for example, a rider wants less ski pressure than position #3 will provide but the rider wants more ski pressure than position #2 will provide.

To fine-tune the length of the limiter straps, loosen the hardware 1 that fastens the cross-shaft to the rails and then turn the shaft 2. Torque hardware to specification.