Headlight Adjustment
The headlight may be adjusted for vertical aim using the following procedure.
-
Place the snowmobile on a level surface with the headlight approximately 25 feet (7.6 m) from a wall.
-
Measure the distance from the floor to the center of the headlight and make a mark on the wall.
-
Start the engine and turn the headlight switch to high beam.
-
Observe the headlight aim. The most intense part of the headlight beam should be aimed 2 inches (5.1 cm) below the mark placed on the wall.
TIPRider weight must be included on the seat. -
Turn the adjustment nut, located inside the hood, just below the headlamp opening. Turn the knob in or out as needed for proper aim.