en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Active Descent Control (ADC) (If Equipped)

NOTICE
Switching to ADC mode while the rear wheels are spinning may cause severe drive shaft and gearcase damage. Always switch to ADC mode while the rear wheels have traction or are at rest.

The Active Descent Control (ADC) system allows engine braking to all four wheels when the vehicle descends a hill or incline. Always engage ADC mode (if equipped) before ascending or descending a hill.

Engaging ADC Mode

The ADC system will automatically engage when all of the following conditions occur:

  • ADC is engaged

  • The throttle must be closed (throttle lever released)

  • The transmission must be in gear (high, low or reverse)

Disengaging ADC Mode

The ADC system will automatically disengage if at least one of the following conditions occur:

  • The AWD switch is moved out of the ADC position

  • The throttle is open (throttle is applied)

  • The transmission is shifted to neutral or park

  • The vehicle is on flat ground, or not actively descending a hill

Parent topic: All Wheel Drive System