Oil Check

The oil dipstick is located on the engine. Access the dipstick through either the right or left wheel well (depending on your model).

To check the oil, do the following:

1. Position vehicle on a level surface and place the transmission in PARK.

2. Stop the engine and allow it to cool down before removing the dipstick.

3. Raise the cargo box. Unlock the dipstick lever 1. Remove the dipstick and wipe it dry with a clean cloth.

4. Reinstall the dipstick and push it into place. Do not lock the dipstick.

   NOTICE

   Make certain the dipstick is inserted all the way into the dipstick tube to keep the depth of the dipstick consistent.

5. Remove the dipstick and check the oil level.

6. Add the recommended oil as necessary to bring the oil level within the SAFE range on dipstick. Do not overfill (see NOTICE below).

   NOTICE

   A rising oil level between checks during cold weather operation can indicate contaminants such as gas or moisture collecting in the crankcase. If the oil level is over the upper mark, change the oil immediately.

7. With the cargo box raised, add engine oil through the oil fill cap 2 located on top of the valve cover, under the cargo box.

8. When finished, reinstall dipstick and lock the lever. Lower the cargo box and secure in position.