en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Park Brake Inspection

  1. Apply the service brakes, and pull the park brake lever.

  2. While engaging the park brake lever, verify the following:

    • The ratchet teeth should be heard and felt as the locking pawl clicks into place.

    • After a few clicks, the park brake indicator lamp on the instrument cluster should illuminate.

    • The rear wheel of the vehicle should not rotate when turning by hand.

    • Ensure that plenty of resistance is felt in the lever’s throw before fully extended to the hard stop.

    NOTICE
    Average pull for of the brake lever is 50 lbs.

  3. When the park brake is fully engaged, the vehicle should not roll while parked.

  4. If park brake fails inspection, contact your dealer or other qualified person for adjustments or repairs.