en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Radiator Coolant

To ensure that the coolant maintains its ability to protect the engine, we recommend that the system be completely drained every five years and fresh Polaris Antifreeze 50/50 Pre-Mix added.

Any time the cooling system has been drained for maintenance or repair, replace the coolant with fresh Antifreeze 50/50 Pre-Mix. If the recovery bottle has run dry, check the level in the radiator. Add coolant as needed.

CAUTION
Escaping steam can cause burns. Never remove the pressure cap while the engine is warm or hot. Always allow the engine to cool before removing the pressure cap.

  1. Unlock the front rack latches and open the front rack.

  2. Remove the front storage compartment by rotating the two quarter-turn fasteners and lifting the compartment out of the vehicle.

  3. Remove the pressure cap.

  4. Using a funnel, slowly add coolant through the radiator filler neck.

  5. Reinstall the pressure cap. Use of a non-standard pressure cap will not allow the recovery system to function properly. Your Polaris dealer can provide the correct replacement part.

  6. Install and secure the front storage compartment.

  7. Close and secure the front rack.

Parent topic: Cooling System