en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Spark Arrester

WARNING

Failure to heed the following warnings while servicing the spark arrester could result in serious injury or death.

  • Do not perform clean-out immediately after the engine has been run, as the exhaust system becomes very hot. Serious burns could result from contact with the exhaust components. Allow components to cool sufficiently before proceeding.

  • Wear eye protection and gloves.

  • Never operate without the spark arrester.

  • Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas that can cause loss of consciousness or death in a very short time.

Periodically clean the spark arrester to remove accumulated carbon. A plugged spark arrester will affect engine performance. Clean daily when driving in mud and water. Replace a cracked or damaged arrester before operating.

  1. Remove the arrester retaining bolt 1 and nut 2.

  2. Remove the arrester from the end of the muffler 3.

  3. Use a non-synthetic brush to clean the arrester screen 4. A synthetic brush may melt if components are warm. If necessary, blow debris from the screen with compressed air.

  4. Inspect the screen for wear and damage. Replace a worn or damaged screen.

  5. Reinstall the arrester. Torque bolt to 9-11 ft-lbs (12-15 N·m).