en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Bluetooth® Operation

The Bluetooth® Classic functionality allows users to pair their phones with the vehicle’s digital gauge. This function allows users to receive call and text alerts while operating the vehicle.

Pairing Your Phone to the Digital Gauge

Use the following procedure to pair your phone with the vehicle’s digital gauge.

NOTE
Bluetooth® functionality is compatible with both iOS® and Android® phones. For iOS® phones, you must go to the Settings option and enable notifications. Most Android® phones will prompt the user automatically to enable notifications as part of the pairing process.

  1. Make sure Bluetooth® is enabled on your phone.

  2. Access the options menu on the vehicle’s digital gauge and select BT PAIR. The Bluetooth® icon 1 will begin to blink.

  3. Find and select Polaris Gauge on your phone’s Bluetooth® menu or prompt. Pairing should occur momentarily. Pairing mode will continue for up to 90 seconds or if you exit the BT PAIR menu.

After successfully pairing the phone, the vehicle’s digital gauge will automatically reconnect with the phone each time it is powered on and within range. No further action is required by the user at this point.

NOTE
Once the digital gauge is powered off, Bluetooth® connectivity will cease. Also, when a new phone is paired with the digital gauge, all missed call and text information from the previous phone will be erased. Up to 16 different phone pairings can be saved to the digital gauge. The digital gauge does not support systems below Android version 4.2 and iOS® version 8.4.

In this section:

  1. Safeguards
Parent topic: Instrument Cluster