en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Engine and Drivetrain Break-in

  1. Fill the fuel tank with clean, fresh fuel.

  2. Check the oil level. Add the recommended oil as needed to maintain the oil level in the normal (safe) operating range.

  3. Drive slowly at first. Select an open area that allows room to familiarize yourself with vehicle operation and handling.

  4. Vary throttle positions. Do not operate at sustained idle.

  5. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride inspection checklist.

  6. During the break-in period, change both the oil and the filter at 25 hours.

  7. Check fluid levels of transmission and all gearcases after the first 25 hours of operation and every 100 hours thereafter.

  8. Pull only light loads.