en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Spark Arrester

WARNING
Failure to heed the following warnings while servicing the spark arrester could result in serious injury or death.

  • Do not perform service on the spark arrester while the system is hot. Exhaust system temperatures can reach 1000° F. Allow components to cool sufficiently before proceeding.

  • Remove any combustible materials from the area.

  • Wear eye protection and gloves.

  • Do not stand behind or in front of the vehicle while purging.

  • Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas that can cause loss of consciousness or death in a very short time.

  • Never operate without the spark arrestor.

  • Never go under the vehicle while it's inclined.

Use the following procedure to periodically purge accumulated carbon from the exhaust pipe.

  1. Remove the arrester clean-out plug located on the bottom of the muffler.

  2. Place the transmission in PARK.

  3. Start the engine.

  4. Purge accumulated carbon from the system by momentarily revving the engine several times.

  5. If carbon is expelled, cover or plug the exhaust outlet and rap on the pipe around the clean-out plug while revving the engine several more times.

  6. If particles are still suspected to be in the muffler, elevate the rear of the vehicle one foot higher than the front. Block the wheels.

  7. Repeat steps 4 and 5 until no more particles are expelled when the engine is revved.

  8. Stop the engine. Allow the arrester to cool.

  9. Reinstall the arrester plug and remove the outlet cover or plug.

Parent topic: Filter Systems