en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Seat Belts

This POLARIS vehicle is equipped with three-point lap and diagonal seat belts for the operator and passenger. Always make sure the seat belts are secured for both the operator and passenger before riding. The driver’s seat belt is equipped with a seat belt interlock. Vehicle speed will be limited if the seat belt is not secured.

To wear the seat belt properly, do the following:

  1. Pull the seat belt latch downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Make sure the belt is not twisted.

  2. Push the latch plate into the buckle until it clicks.

  3. Release the strap, it will self-tighten.

  4. Press the red release latch on the buckle to release the seat belt.

TIP
The position of the shoulder strap can be adjusted to the height of the operator. Have an adult relocate the mounting bolt 1 to a different position, making sure the nut and bolt are tightened securely.
TORQUE

Seat Belt Mounting Bolt:

30 ft-lbs (40.6 Nm)

In this section:

  1. Seat Belt Inspection