en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Parking Brake Adjustment

  1. Inspect and perform any needed service on the brake pads before adjusting the parking brake.

  2. Position the vehicle on a level surface. Place the transmission in neutral.

  3. Carefully elevate the rear of the vehicle slightly. Use an appropriate lift.

  1. Loosen the jam nut on the parking brake adjustment bolt 1.

  2. While rotating the rear wheels by hand, tighten the adjustment bolt until significant brake drag is detected. Then back the adjustment bolt out 1/4 turn.

  3. Hold the adjustment bolt in place and tighten the jam nut securely against the lever arm.

  4. Check parking brake lever movement. Verify that the rear wheels rotate freely with the parking brake off (lever in DOWN position) and that the vehicle will not move when the parking brake is applied (lever in UP position).

  5. Verify that the park brake lever stays in the UP position when the brake is fully applied.

Parent topic: Parking Brake