Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident. Always inspect the vehicle before each use to make sure it's in safe operating condition.
Item | Remarks | Page |
---|---|---|
Brake system/pedal travel | Ensure proper operation | Brakes |
Brake fluid | Ensure proper level | Brakes |
Front suspension | Inspect, lubricate if necessary | Lubrication Recommendations |
Rear suspension | Inspect, lubricate if necessary | Lubrication Recommendations |
Steering | Ensure free operation | - |
Tires | Inspect condition and pressure | Tires |
Wheels/fasteners | Inspect, ensure fastener tightness | Tires |
Frame nuts, bolts, fasteners | Inspect, ensure tightness | - |
Drive Belt | Inspect, ensure installed correctly | - |
Driveline | Inspect chain, adjust tension, and lubricate as needed | - |
Fuel and oil | Ensure proper levels | Oil Recommendations |
Throttle | Ensure proper operation | Brake/Throttle Pedal |
Indicator lights/switches | Ensure proper operation | Indicator Lamps |
Intake pre-filters | Inspect, clean | - |
Daytime Running Lights (LED) | Check operation | - |
Brake light/tail lamps | Check operation | - |
Seat Latch | Push down on the seat back to ensure the latch is secure | - |
Seat Belt | Check length of belt for damage, check latches for proper operation | Seat Belts |
Cab Doors (If equipped) | Check doors and latches for wear or damage. | - |
Grass and Leaves | Remove grass, leaves, foreign matter, and other flammable material or debris, especially near the exhaust system | - |