en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Spark Arrestor

WARNING

Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death.

  • Do not perform service on the spark arrester while the system is hot. Allow components to cool sufficiently before proceeding.

  • Wear eye protection and gloves.

  • Never operate without the spark arrestor.

  • Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas.

To remove accumulated carbon, clean the spark arrestor at the intervals recommended in the Periodic Maintenance Chart beginning on Maintenance Intervals.

  1. Remove the bolt and remove the arrestor 1 from the end of the muffler.

  2. Use a non-synthetic brush to clean the arrestor screen. A synthetic brush may melt if components are warm. If necessary, blow debris from the screen with compressed air.

  3. Inspect the screen for wear and damage. Replace the arrestor if damage is found.

  4. Reinstall the arrestor.

  5. Torque the bolts to specification.

NOTICE

Spark Arrestor Bolt

4.1 ft-lbs (5.5 N·m)