en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

POLARIS Variable Transmission (PVT)
System Drying

There may be some instances when water is ingested into the PVT system. Use the following instructions to dry it out before operating:

  1. Position the vehicle on a level surface.

  2. Remove the red drain plug on the outer clutch cover. Allow the water to drain completely. Reinstall the drain plug.

  3. Place the transmission in PARK.

  4. Start the engine.

  5. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. Do not hold the throttle wide open for more than five (5) seconds.

  6. Allow the engine RPM to settle to idle speed. Apply the brakes. Shift the transmission to the lowest available range.

  7. Test for belt slippage. If the belt slips, repeat the process.

  8. Your vehicle requires service as soon as possible. Your POLARIS dealer can assist.