en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Beam Adjustment

To adjust the headlight beam, do the following:

  1. Place the vehicle on a level surface with the headlight approximately 7.6 m ( 25 ft) from a wall.

  2. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.

  3. Apply the brakes. Start the engine. Turn on the headlights.

  4. Observe the headlight aim. The most intense part of the headlight beam should be aimed 20 cm (8") below the mark placed on the wall. Include the weight of a rider on the seat while performing this step.

  5. If a headlight needs adjustment, locate the adjustment screw 1 at the rear of the headlight.

  6. Tighten the screw to adjust the lamp up. Loosen the screw to adjust the lamp down.

  7. Repeat steps 4-6 until the lamp is properly adjusted.