en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Toe Alignment

NOTICE
Do not attempt to adjust alignment. All steering adjustments should be performed by an authorized service technician. Your authorized dealer can assist.

Use the following procedure to check the toe alignment of the vehicle. The recommended toe alignment is 3-6 mm toe out.

  1. Position the vehicle on a level surface.

  2. Place the handlebars in a straight-ahead position.

  3. Tie a length of string 3 between two stands as shown in the illustration. Position the stand 4 so that the string is flush with the side of the rear tire.

    TIP
    If available, you may use a long straight-edge instead of string.

  4. Measure the distance from the string to the rim at the front 1 and rear 2 of the front rim. The rear measurement should be 2-3 mm more than the front measurement on each side of the vehicle to obtain the recommended 3-6 mm toe out alignment.

  5. Repeat the measurement procedure on the other side of the vehicle.

  6. If you discover improper alignment, service is required. Your authorized dealer can assist.