en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Limiter Strap Adjustment

The front torque arm limiter strap is factory-set at position 1.

POLARIS recommends leaving the limiter strap length at position 1 to maintain the optimum ride characteristics of the snowmobile. Riders who desire less ski pressure and more weight transfer toward the rear of the snowmobile can lengthen the limiter strap by changing to position 2 or 3.

To adjust the limiter strap, do the following:

  1. Loosen the lock nut.

  2. Adjust the limiter strap.

  3. Tighten the lock nut.

    TORQUE

    Lock Nut

    16 ft-lbs (21 N·m)

Cross-Shaft Adjustment

NOTICE
The limiter strap cross-shaft can also be loosened, clocked, and retightened to fine-tune limiter strap length.

To fine-tune the length of the limiter straps, loosen the hardware 1 that fastens the cross-shaft to the rails and then turn the shaft 2. Torque hardware to specification.

TORQUE

Front Cross-Shaft Fastener:

33 ft-lbs (45 N·m)