Independent Front Suspension (IFS) Shock Adjustments
DO NOT EXCEED the MIN / MAX preload values (defined by the tables in this section). Never adjust spring preload shorter than the minimum allowable length. Adjusting shorter than this length could result in damage to the suspension. Failure to comply may result in injury or damage to equipment.
IFS SHOCK SPRING SETTINGS
Always perform shock spring preload adjustments with the weight of the vehicle removed from the shock and with the shock at full extension.
|
FACTORY SPRING |
FACTORY INSTALLED LENGTH |
MINIMUM INSTALLED LENGTH |
|---|---|---|
|
Indy Cross Country 136 |
10.5 in (26.67 cm) |
9.25 in (23.5 cm) |
IFS Remote Reservoir Factory Clicker Settings
The IFS shock of your Matryx vehicle is equipped with dual shock clickers. The clickers increase or decrease compression damping when adjusted. The inside clicker 1 adjusts shock compression during low speed compression events. The outside clicker 2 adjusts shock compression during high speed compression events. This shock also utilizes a rebound compression clicker 3 that controls how fast the shock returns to its full extended length. Use a flat-head screwdriver to adjust the rebound clicker.
To reset shock clickers, rotate the clicker to full stiff, and then back off the same number of clicks for each shock. Turn clicker clockwise to increase compression and counterclockwise to decrease compression.
|
Model |
Clicker Setting (from full stiff) |
|---|---|
|
Indy Cross Country 136 |
Inside Clicker: 11 Outside Clicker: 6 Rebound Clicker: 6 |