en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Adjustment

The headlight beams are adjustable.

  1. Ensure the tire pressure of all tires is at recommended levels.

  2. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) 2 from a wall.

    ITEM DESCRIPTION
    1 Measure Distance = 7.9 in (20.0 cm)
    2 Measure Distance = 25 ft (7.6 m)
    3 Headlight Center of Bulb

  3. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.

  4. Apply the brakes with the machine in PARK. Turn the ignition on, then turn on the headlights.

  5. Observe the headlight aim. The most intense part of the headlight beam should be aimed 20 cm (8 in) below the mark placed on the wall.

    NOTE
    Rider weight must be included in the seat while performing this procedure.

  6. If a headlight needs adjustment, locate the adjustment screw 4 at the back of the headlight. Loosen the screw, adjust the headlight, then tighten the screw.

  7. Adjust the beam to desired position. Repeat the procedure to adjust the other headlight.

    WARNING
    Due to the nature of light utility vehicles and where they are operated, headlight lenses become dirty. Frequently washing is necessary to maintain lighting quality. Riding with poor lighting can result in severe injury or death.

  8. Repeat steps 4–6 until the lamp is properly adjusted.

Parent topic: Lights