en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Bluetooth® Pairing

The INDIAN MOTORCYCLE Ride Command touchscreen display can be connected to a smart-phone and a headset simultaneously.

NOTICE
PowerBand audio Bluetooth speaker (if equipped) should be paired to your Ride Command display upon delivery of your unit. If audio unit unpairs from the display, power cycle the vehicle and follow instructions for pairing a device, below.
NOTICE
Always pair the smart-phone first, followed by accessories.

To pair a device, do the following:

  1. From the Bluetooth® Devices settings screen, the Phone screen, or the Music screen, tap on the Add Device button to bring up the pairing prompt.

  2. Put your Bluetooth® device into pairing mode. PowerBand audio Bluetooth speaker (if equipped) will always be in pairing mode unless already paired to another device.

  3. Select the name of the device you want to pair from the touchscreen display to finish the pairing process.

  4. Confirm pairing (if applicable). Depending on the device you are pairing to the display you may be prompted to confirm pairing. When pairing a PowerBand audio Bluetooth speaker (if equipped) a successful pairing will be confirmed by an audio tone from the speaker.

TIP
To play audio from the PowerBand audio Bluetooth speaker (if equipped), after successfully pairing the speaker and phone to the digital round, ensure your phone is not muted. Audio is controlled from the multimedia switch. See the Media Switch section for more information.