en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Side Panel / Footwell Installation

LEFT SIDE PANEL / FOOTWELL

  1. Install the footwell onto the vehicle. Loosely install the four fasteners and four nuts into the bottom of the footwell.

    NOTICE
    Observe the condition of each push rivet and check for damage. If damaged, Polaris recommends that you replace the push rivet before installation.

  2. Loosely install the two fasteners and two nuts into the passenger footrest.

  3. Loosely install the three fasteners and three nuts into the passenger footrest bracket.

  4. Install the four push rivets securing the footwell to the front cab, rear cab, and brake support bracket.

  5. Install the rear left fender flare onto the vehicle and install the eight push rivets.

  6. Install the front left fender flare onto the vehicle and install the six push rivets.

  7. Install the side panel onto the vehicle and install the four push rivets.

  8. Torque all fasteners to specification.

    TORQUE

    Footwell / Passenger Footrest to Chassis Fasteners:

    35 in-lbs (4 N·m)

    Passenger Footrest Bracket Nuts:

    15 ft-lbs (20 N·m)

  9. Install the seats. See Seat Installation.

RIGHT SIDE PANEL / FOOTWELL

  1. Install the footwell onto the vehicle. Loosely install the four fasteners and four nuts into the bottom of the footwell.

    NOTICE
    Observe the condition of each push rivet and check for damage. If damaged, Polaris recommends that you replace the push rivet before installation.

  2. Loosely install the two fasteners and two nuts into the passenger footrest.

  3. Loosely install the three fasteners and three nuts into the passenger footrest bracket.

  4. Install the five push rivets securing the footwell to the front cab, rear cab, and exhaust cover.

  5. Install the rear right fender flare onto the vehicle and install the eight push rivets.

  6. Install the front right fender flare onto the vehicle and install the seven push rivets.

  7. Install the side panel onto the vehicle and install the two push rivets.

  8. Torque all fasteners to specification.

    TORQUE

    Footwell / Passenger Footrest to Chassis Fasteners:

    35 in-lbs (4 N·m)

    Passenger Footrest Bracket Nuts:

    15 ft-lbs (20 N·m)

  9. Install the seats. See Seat Installation.