en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Vehicle Immersion

If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle in for service before starting the engine. Your POLARIS dealer can provide this service.

If it's impossible to take your ATV to a dealer before starting it, follow the steps outlined below.

  1. Move the ATV to dry land or at the very least, to water below the footrests.

  2. Check the air box. If water is present, dry the air box and replace the filter with a new filter. If equipped, remove the air box drain plug to drain water. Reinstall the drain plug.

    CAUTION
    Serious damage could occur if the air box drain plug is not reinstalled properly.

  3. Remove the spark plugs.

  4. Turn the engine over several times using the electric start.

  5. Dry the spark plugs. Reinstall the plugs or install new plugs.

  6. Attempt to start the engine. If necessary, repeat the drying procedure.

    CAUTION
    Serious damage can occur after immersion if fluids are not changed promptly. Your authorized dealer can assist.

  7. Take the vehicle in for service as soon as possible, whether you succeed in starting it or not. Your authorized dealer can provide the required service.

  8. If water has been ingested into the PVT, follow the procedure in the PVT System section for drying out the PVT.