en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Hitch Removal / Installation

  1. To remove the hitch, remove the cotter pin 1 and hitch pin 2. Remove the hitch, then reinstall the hitch pin 2 and secure the cotter pin 1.

  2. To install the hitch, remove the cotter pin 1 from the hitch pin and remove the hitch pin 2.

  3. Install the hitch to the receiver.

  4. Reinstall the hitch pin (from the left side of the hitch) through the bore of both the receiver and the hitch.

  5. Reinstall the cotter pin. Make sure the hitch assembly is secure at that the cotter pin is properly engaged over the hitch pin.

NOTICE
After 1000 km of use, tighten the bolt holding the trailer ball to the hitch to 445 N·m.
Parent topic: Hitches