LEAD ACID LOW MAINTENANCE BATTERY
CHARGING
-
The battery must be fully charged before use or battery life will be significantly reduced by 10-30% of the battery's full potential.
-
Nominal voltage is 12.6 to 12.8 Volts when fully charged. If the voltage falls below 12.5V, charge it immediately, or the battery service life and vehicle performance may be affected.
-
Polaris recommends using a BatteryMINDer® 12V 1.5 AMP Convertible (PN 2830511) charger (or a similar charger), which can be ordered through your normal parts channel.
-
Charge the battery with a charging output no larger than 10% of the battery’s amp-hour rating.
MAINTENANCE
-
Recharge the battery to its full capacity every 30 to 60 days.
-
If the battery is stored or used in a partially charged condition, hard crystal sulfation will form on the plates, reducing the efficiency and service life of the battery.
-
Never add electrolyte or distilled water to the battery. Doing so will damage the case and shorten the life of the battery.
-
Store the battery in the vehicle with the cables disconnected, or store the battery in a cool / dry location. Batteries will self discharge more rapidly when stored in extreme temperatures.
TESTING
-
Test the battery using the PU-50296 battery tester.
-
Proper load testing of the battery requires special equipment and can be performed by your dealer.