Oil Change
The drain plug 2 is located on the lower right side of the main gearcase, near the fill plug 1. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.
To change the oil, do the following:
-
Remove the fill plug.
-
Place a drain pan under the drain plug. Remove the drain plug. Allow the oil to drain completely.
-
Wipe the magnetic end of the drain plug clean to remove accumulated metallic filings.
-
Reinstall the drain plug. Torque to specification.
-
Add the recommended oil as needed. Do not overfill.
-
Reinstall the fill plug. Torque to specification.
-
Check for leaks. Dispose of used oil properly.