Headlight Beam Adjustment
| 1 Distance from wall | 7.6 m (25 ft.) |
| 2 Measurement between wall mark and most intense portion of the headlight beam | 20 cm (8 in.) |
To adjust the headlight beam, do the following:
-
Place the vehicle on a level surface with the headlight approximately 7.6 m (25 ft.) from a wall.
-
Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.
-
Apply the brakes. Turn the key on. Turn on the headlights.
-
Observe the headlight aim. The most intense part of the headlight beam should be aimed 20 cm (8 in.) below the mark placed on the wall. Include the weight of a rider on the seat while performing this step.
-
If a headlight needs adjustment, locate the adjustment screw at the back of the headlight.
-
Loosen the screw, adjust the headlight, and tighten the screw.
-
Repeat steps 4-6 until the lamp is properly adjusted.