Air Conditioning
HVAC Intake Filter Cleaning
The HVAC Intake filter is located below the hood.
-
Loosen the worm gear clamp that secures the filter. Remove the filter from the vehicle.
-
Clean the filter with low air pressure. Check for damage, replace if damaged.
HVAC Recirculation Filter Cleaning
The HVAC Recirculation filter is located beneath the dash in the HVAC airbox.
-
Remove the two pushclips 1 that retain the filter cover. Remove the cover
-
Unclip both sides of the filter to remove it from the housing. Pull the filter downwards, then away from the filter housing.
-
Clean the filter with low air pressure. If the filter is damaged, replace the filter.
Condenser Cleaning
The condenser should be cleaned at the correct service interval as outlined in the Polaris Maintenance Schedule. The condenser is located at the front of the vehicle, behind the front grille.
To clean the condenser, do the following:
-
Stop the machine on a flat level surface. Place the gear selector in PARK. Stop the engine and exit the vehicle.
-
Remove the hood. See Hood.
-
Use low pressure air or water to clean the condenser.
-
Reinstall the front grille and ensure it is snapped into place.