Programmable Service Interval
The service interval counter is programmed to 25 hours at the factory. As hours of engine operation increase, the counter decreases. The wrench icon will flash for about 10 seconds when the counter reaches zero (0), and each time the key is turned on thereafter, until the counter is reset.
When this feature is enabled, it provides a convenient reminder to perform routine maintenance. Refer to the Polaris Maintenance Schedule for recommended service intervals.
Use the following procedure to reset or change the service interval.
-
Press and hold the MODE button to enter the settings menu.
-
Press either toggle button to cycle to the “Service Hours” option. Press MODE to select.
-
Press MODE to reset the existing value and exit, or press either toggle button to change the value. Press MODE to save and exit to the settings menu.
