PVT Break-in (Clutches / Belt)
A proper break-in of the clutches and drive belt will ensure a longer life and better performance. If a belt fails, always clean any debris from the duct and from the engine compartment.
Standard Break-in
Drive at slower speeds for the first 50 miles (80 km) of operation. Carry only light loads. Avoid aggressive acceleration, high-speed operation and prolonged operation at a specific RPM during this period.
Sand / Dune Break-in
Drive in low gear for the first 5 miles (8 km) of operation. Avoid prolonged low speed operation at high throttle. Avoid aggressive acceleration, high-speed operation and prolonged operation at a specific RPM during this period.
Belt Life
To extend belt life, use low gear in the following conditions:
-
When hauling or towing heavy cargo
-
When consistently operating at speeds less than 30 MPH (48 km/h) in hard-pulling terrain, such as mud, rocks or sand/dune environments.