en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Starting the Engine

  1. Position the vehicle on a level surface outdoors or in a well ventilated area.

  2. Sit in the driver's seat and fasten the seat belt. Secure the cab nets.

  3. Place the transmission in NEUTRAL and apply the PARKING BRAKE.

  4. Apply the brakes. Do not press the throttle pedal while starting the engine.

  5. Turn the ignition key past the ON/RUN position to START. Engage the starter for a maximum of five seconds. Release the key when the engine starts.

  6. If the engine does not start within five seconds, return the ignition switch to the OFF position and wait five seconds. Repeat steps 5 and 6 until the engine starts.

  7. Vary the engine RPM slightly with the throttle to aid in warm up until the engine idles smoothly.

NOTICE
Operating the vehicle immediately after starting could cause engine damage. Allow the engine to warm up for several minutes before operating the vehicle.