|
High Beam |
The headlight switch is set to high beam. This indicator will
flash if there is a problem with the low or high beam light. |
|
Chassis Fault |
The alert symbol illuminates if a chassis fault occurs. |
|
Turn Signals |
One arrow flashes when the corresponding turn signal is activated.
Both arrows flash when the hazard signal is activated. If there
is a problem in the signal system, the lamps will flash at twice the
normal rate.
|
|
ABS Not Activated |
The indicator remains on until the anti-lock system activates,
which occurs when vehicle speed exceeds 6 mph
(10 kph). When the lamp is illuminated,
the anti-lock brakes will not activate, but the conventional brake
system will continue to operate normally. |
|
Neutral |
The transmission is in neutral and the power switch is ON. |
|
Low Fuel |
This lamp illuminates when 0.5 gal
(1.9 l) of fuel remains in the tank. |
|
Check Engine |
If this lamp illuminates while the engine is running, see
your dealer promptly. The light will remain on if the tilt sensor
shuts down the engine. If abnormal sensor or engine operation is detected
the light will remain on as long as the fault condition exists. Retrieve
the error codes for diagnosis. See Engine Error Codes. |
|
Engine Overheat |
The engine overheat light will illuminate when the engine temperature
exceeds normal operating temperature. |
|
Vehicle Speed |
When standard mode is selected, speed displays in miles per
hour. |
|
When metric mode is selected, speed displays in kilometers
per hour. |