Soft-Top Installation
1. Remove top from it’s protective storage case. Leave the top rolled up. |
|
2. Insert semi-rigid front edge of top into the channel at the front of the frame assembly. |
|
3. Slide the semi-rigid front edge into the channel. Make sure the top is centered in the channel by matching the overhang amount on each side. |
|
4. Route the top over the front of the frame assembly and unroll toward the rear of the vehicle. Make sure the top remains evenly spaces on the frame assembly. |
|
5. Fasten the two rear buckles A around the rear of the frame assembly. |
|
6. Fasten the four side buckles B. |
|
7. Feed center strap C through welded loop on frame assembly, then through attached ring. Loosely fasten using hook and loop material. |
|
8. Make sure top is centered on frame assembly. Gradually tighten rear and side buckles, making sure top stays centered. |
|
9. When six buckles are tight, tighten center strap. |